Android for Nextbook Flexx 10.1 (NXW101QC232)

Features:
- Android 6.0.1 (MOB30J) (built 2016-05-07)
- Kernel 4.4.9
- Power Menu app 
- Custom "Audio Path" app to allow you to switch between Headphones and Speakers (until jack detection works)
- Viper4Android by ViPER520 (http://vipersaudio.com/)
- DSDT tweaks built into kernel
- DSDT Patch provided (to show what I changed) (boot/dsdt/dsdt_changes.patch)
- Compiled from source and fully optimized for silvermont architecture
- Cleaner ISO generation process compared to 007 and eariler. Smaller download.

Working:
- Wifi
- 3D Graphics
- Touchscreen
- Orientation/Rotation
- SD Card Slot
- Battery Status
- Google Play Services
- USB (standard host mode, not OTG)
- Power Button (* with included DSDT)
- ARM Emulation Compatibility (enable in Settings > Apps compatibility)
- Other GPIO Buttons (Windows Key = Home, Vol Keys) (* with included DSDT)
- Sound (No jack detection yet, mic input now works) (* with included DSDT)
- Lid support (closing pogo keyboard) (currently does not shut off screen, but is detected by kernel)

Not Working:
- Bluetooth
- Brightness control
- Cameras (need 3.x drivers ported to 4.4)
- Full power management (see linux bug: https://bugzilla.kernel.org/show_bug.cgi?id=109051)
- Probably other stuff

Not tested:
- HDMI Output

Known Issues:
- No headphone jack detection
- Speakers may hiss after reboot until kernel re-initializes driver
- If skipping google setup, the last page may appear twice.
- Closing lid shuts off USB, thus if running from USB, will crash
- Reboot may be finicky, due to noefi and reboot kernel boot flags. Disabling the boot flag may result in
  power off actually rebooting, and will increase kernel load time by up to 30 seconds.
- When pressing power, or the screen times out, the image will appear frozen, since the system
  cannot set the screen to off. To resolve, press the power key and the system should appear
  functional again.

How to use:
- Extract ISO to USB Key
- Boot from USB key on Nextbook